Ask An Expert
| Sampling: | With internal sampling pump, flow rate is up to 1 L/min, ten grades of pumping suction for selection |
| Gas: | Ethylene C2H4 |
| Measure Range: | 0 to 1000 ppm |
| Resolution: | 1ppm |
| Sampling method: | Diffusion |
| Sensor type: | CO2: solid electrolyte sensor, O2：electrochemical sensor |
| Detection range: | CO2：0.04 to 5.00 % and O2：0.0 to 30.0 % |
| Detection accuracy: | CO2：± 30 % rdg (rdg = reading) and O2：± 3 % F.S. (F.S. = full scale) |
| Sampling Method: | Diffusion | ||||||
| Working conditions: |
|
||||||
| Explosion proof grade: | Exia II CT3 | ||||||
| Protection grade: | IP65 |
| Measurement principle: | Non-dispersive infrared (NDIR) |
| Gas Detected: | SF6: 0 to 50 ppm range/ 0 to 1000 ppm range (as per req.) |
| Detection Uncertainty: | <1.5 % F.S |
| Detection Resolution: | 0.1ppm |
| Gas detected: | NO2 |
| Detection principle: | Electrochemistry |
| Sampling method: | Pumping suction, flow rate can up to 1L/min, ten grades of pumping suction for selection. |
| Measure range: | 0 to1000 ppm |
| Gas detected: | Sulfur dioxide SO2 |
| Detection principle: | Electrochemistry |
| Sampling method: | Pumping suction, flow rate can up to 1L/min, ten grades of pumping suction for selection. |
| Measure range: | 0 to1000 ppm |
| Sampling method: | Diffusion | ||||
| Measurement principle: | Electrochemical (oxygen, toxic gases), Catalytic combustion (flammable gases), Infrared principle (carbon dioxide gas) | ||||
| Detector gas: | Flammable gases, oxygen gas, toxic and harmful gases | ||||
| Response time: |
|
| Gas Detected: | O2 CH4 CO2 VOC CO H2S SO2 CL2 NO2 NH3 |
| Detection principle: | Electrochemical principle (O2 CO H2S SO2 CL2 NO2 NH3) Infrared principle (CH4 CO) Photoionization principles (VOC) |
| Measurement Range: | O2: 0-30% VOL, CH4: 0-50000 PPM, CO2:0-50000 PPM VOC:0-2000 PPM, CO:0-999 PPM, H2S: 0-200 PPM SO2: 0-25 PPM, CL2: 0-50 PPM, NO2: 0-100 PPM, NH3:0-100 PPM |
| Resolution: | O2: 0.01% VOL, CH4: 1 PPM, CO2:1 PPM VOC:1 PPM, CO:0.1 PPM, H2S: 0.1 PPM SO2: 0.01 PPM, CL2: 0.01 PPM, NO2: 0.01 PPM, NH3:0.01 PPM |
| Gas Detected: | Nitrogen N2 |
| Detection principle: | Electrochemical principles |
| Measurement Range: | 0 to 100 %.Vol |
| Resolution: | 0.01 %VOL |