Ask An Expert
Sample Concentrator LSCO-A10 accelerates the concentration of samples by blowing nitrogen gas at the rate of 15 L/min. It comes with a microprocessor controller which controls the temperature of high-purity aluminium when the equipment is in operation. The models have provisions of concentrating around 3 to 24 samples at a time.
| Number of samples | 3 to 24 wells |
| Nitrogen Flow Rate | 15 L/min |
| Nitrogen Pressure | 0.02 MPa (Gas needle ≤ 16pcs) 0.05MPa (Gas needle > 16pcs) |
| Block Quantity | 1 |
| Temperature Control Range | Room temp. +5 ℃ to 160 ℃ |
| Needle length | 150 mm |
| Temp. uniformity | ≤ ± 0.5 ℃ |
| Temp. accuracy | ±0.5 ℃ (at 40 ℃) ± 1 ℃ (at 120 ℃) |
| Display accuracy | 0.1 ℃ |
| Heating time | ≤ 15 min (from 25 ℃ to 160 ℃) |
| Timing range | 1 min - 99 h 59 min |
| Voltage | AC 220 V or AC 110 V, 50 / 60 Hz |
| Power Consumption | 300 W |
| Dimension | 260 x 220 x 450 mm |
| Weight | 7 kg |
| Block no. | Diameter of tubes | Capacity |
| SCB-01 | 10 mm | 24 |
| SCB-02 | 12 mm | 24 |
| SCB-03 | 13 mm | 24 |
| SCB-04 | 15 mm | 16 |
| SCB-05 | 16 mm | 16 |
| SCB-06 | 19 mm | 12 |
| SCB-07 | 20 mm | 12 |
| SCB-08 | 26 mm | 8 |
| SCB-09 | 28 mm | 4 |
| SCB-10 | 40 mm | 3 |
| SCB-11 | 1.5 ml (centrifuge tube) | 24 |
| SCB-12 | 2.0 ml (centrifuge tube) | 24 |
Sample Concentrator is used for sample preparation, drug screening, hormone assays, chromatographic analysis and scintillation counting.
Sample Concentrator is used for sample preparation, drug screening, hormone assays, chromatographic analysis and scintillation counting.
