Portable Conductivity Meter LPCM-A11 is adapted with different modes for measuring quality of water on parameters such as conductivity, TDS and temperature. Due to its portable design, it is suitable for outdoor measurements i.e. on site water testing, remote area water testing and for research purpose. It is reliable and user friendly.
Conductivity |
|
||||||||||
TDS |
|
||||||||||
Temperature |
|
||||||||||
Temperature compensation | 0 to 100 °C, 32 to 212 ° F, Manual or Automatic | ||||||||||
Temperature coefficient | Linear and Pure water compensation | ||||||||||
Reference temperature | 20 °C or 25 °C | ||||||||||
Stability conditions | Low or high | ||||||||||
Cell constant | K= 0.1, 1, 10 or custom | ||||||||||
Calibration due | 1 to 31 days or off | ||||||||||
Memory | 500 data sets | ||||||||||
Data hold | Manual or auto-end point | ||||||||||
Connector | 6 pin mini plug | ||||||||||
Power Control | Manual or Automatic (10, 20 or 30 minutes after last key pressed) | ||||||||||
Power | 3 × 1.5 V AA batteries or DC 5 V power adapter | ||||||||||
Dimension (L × W × H) | 170 × 85 × 30 mm | ||||||||||
Weight | 300 g |
Common features
Calibration due reminder informs operator to calibrate the meter regularly
Stability indicator displays the status of current measurement
Auto hold function freezes stable, final readings for better viewing and recording
1 to 5 points push button calibration to automatically identify calibration solutions
Selectable temperature units (°C or °F) for different application requirements
Expanded memory stores and recalls up to 500 readings
Calibration report provides details of calibration standard and cell constant
Help message as an operational guide, helps users for quick access to the parameters
Reset function automatically resumes all settings back to factory default options
Store data is transferrable into computer via USB communication interface
Conductivity / TDS/ Temperature
Conductivity: 1 to 5 point calibration with automatically identification of calibration solutions
Temperature: Can select cell constant (0.1/1/10) and normalization temperature 20°C or 25°C
TDS and Salinity: TDS conversion factor to meet different water quality measurement requirements
linear and pure water compensation improves the measurement accuracy
Used for quality testing of water on different parameters in research and development labs, water resources and plants in nearby or remote area.
Number of accessories | Accessories name |
1 | Conductivity electrode (range: 10 µS/cm to 10 mS/cm) |
2 | Temperature probe |
3 | Standard calibration solutions (84 µS/cm, 1413 µS/cm, 12.88 mS/cm) |
4 | Carrying case |
Number of accessories | Accessories name |
1 | Conductivity electrode for general application |
2 | Conductivity electrode (K= 0.1): Suitable for measuring the low conductivity liquids ( <10 µS/cm ) for pure water |
3 | Conductivity electrode (K= 10): Suitable for measuring the high conductivity liquids ( >20 mS/cm ) for sea water |