Labtron LLTT- A16 is a multifunctional instrument with LCD screen, four chambers, each chamber has two cooling bath. The instrument is designed and made as per ASTM D2386 “Test Methods for Solidifying Point of Petroleum Products”, ASTM D97 “Test Methods for Pour Point of Petroleum Products”, ASTM D2500 “Test Methods for Cloud Point of Petroleum Products”, and ASTM D6371 “Test Methods for Cold Filter Plugging Point of Distillate Fuels”.
Specifications
| Refrigeration system | New-type refrigeration compressor |
| Controlling temperature of cold trough | Cold trough I: 0 °C, ± 0.5 °C; Cold trough II: 0 °C, (-17) °C, ± 0.5 °C; Cold trough III: (-17) °C, (-34) °C, ± 0.5 °C; Cold trough IV: (-70) °C, ± 0.5 °C |
| Ambient temperature | ≤ 30 ℃ |
| Relative humidity | ≤ 85 % |
| Dimensions | 930 x 570 x 108 mm |
| Total power consumption | ≤ 1700 W |
| Power supply | AC 220 V ± 10 %, 50 Hz; |
Features
LCD display
Convenient to move
No need to use cooling liquid
Easy to use and high efficiency
Applications
It can be mainly used in petroleum, chemical industry and research field. It is suitable to determine solidifying point, pour point, cloud point and cold filter plugging point.
Request Quote
| Calorimeter type | Isoperibol |
| Temperature range | 5 to 40°C |
| Measurement range | 5 to 40 MJ/ kg |
| Operation Mode | The outer barrel temperature is constant |
| Temperature resolution | 0.0001°C |
| Precision | RSD ≤0.1 % |
| Testing time | 8 min |
| Power | ≤1.5 kW |
| Power supply | 220 V, 50/60 Hz |
| Dimension | 540 × 420 × 420 mm |
| Weight | 45 kg |
| Calorimeter type | Isoperibol |
| Temperature range | 5 to 40°C |
| Measurement range | 5 to 40 MJ/ kg |
| Operation Mode | A. Outer barrel temperature follows room temperature change mode Or B. Outer barrel temperature constant mode |
| Temperature resolution | 0.0001°C |
| Precision | RSD ≤0.1 % |
| Testing time | 8 min |
| Power | ≤1.5 kW |
| Power supply | 220 V, 50/60 Hz |
| Dimension | 630 × 420 × 450 mm |
| Weight | 55 kg |
| Calorimeter type | Isoperibol |
| Oxygen filling | Fully automatic oxygen filling & releasing, fully automatic bomb raising & lowering |
| Bomb volume | 250 ml |
| Analysis time | < 8 min full test process: |
| Bomb washing | Manual |
| Bomb pressure (maximum) | 20 MPa |
| Bomb identity | Yes |
| No. of Tests | 6/hour |
| Temperature resolution | 0.0001 K |
| Precision (RSD) | ≤ 0.01 % |
| Heat Capacity Stability | ≤ 0.25 % within three months |
| Gas requirement | 99.5 % oxygen |
| Water requirements | Distilled water |
| Energy measurement range | 0 to 50000 J |
| Bucket filling | Automatic |
| Stirring method | Propeller |
| Reproducibility | 0.10 % (analysis of 1 g of benzoic acid) |
| Temperature Increase | 2°C (average) |
| Temperature measurement | PT1000 (temperature probe) |
| Working temperatures | ≤ 32°C |
| Cooling type | Refrigerating device |
| Network | Yes |
| Maximum Power | 0.6 kW |
| Power Inverter | No |
| Power supply | 220 V ±, 15 to 10 %, 50/60 Hz |
| Advance Calculations | Yes |
| Dimension | Main body: 440 × 550 × 460 mm Water Tank: 390 × 550 × 440 mm |
| Weight | 50 kg |
| Calorimeter type | Isoperibol |
| Oxygen filling | Semi-automatic |
| Bomb volume | 282 ml |
| Analysis time | 15 to 25 min |
| Bomb washing | Manual |
| Bomb pressure (maximum) | 20 MPa |
| Bomb identity | No |
| No. of Tests | 2 to 4/ hour |
| Temperature resolution | 0.0001 K |
| Precision (RSD) | ≤ 0.15 % |
| Heat Capacity Stability | ≤ 0.25 % within three months |
| Gas requirement | 99.5 % Oxygen |
| Water requirements | Distilled water |
| Energy measurement range | 0 to 50000 J |
| Bucket filling | Semi-Automatic |
| Stirring method | Blade |
| Reproducibility | 0.15 % (analysis of 1 g of benzoic acid) |
| Temperature Increase | 2°C (average) |
| Temperature measurement | PT1000 (temperature probe) |
| Working temperatures | ≤ 32°C |
| Cooling type | Automatic by water circulation |
| Network | Yes |
| Maximum Power | 0.5 kW |
| Power Inverter | No |
| Power supply | 220 V ±, 15 to 10 %, 50/60 Hz |
| Advance Calculations | No |
| Dimension | Main body: 600 × 417 × 908 mm |
| Weight | 106 kg |
| Measuring Range For Aviation Gasoline | 86.0 to 105.0/MON |
| Measuring Range For Gasoline For Motor Vehicles | National standard: 65.0 to 110.0/RON National-V standard: 70 to 115.0/RON Blended gasoline: 75.0 to 120.0/RON Light gasoline: 50.0 to 85.0 /MON Isomerized gasoline: 85.0 to 120.0/RON Arene gasoline: 90.0 to 120.0/RON |
| Measuring Range For Ethanol | E93: 92.0 to 95.0/RON E97: 95.0 to 99.0/RON Judgement: 60.0 to 120.0/RON |
| Measuring Range For Automobile Diesel Fuels | Cetane number: 25 to 75/CN Cetane index: 20 to 80/CI |
| Measuring Accuracy | Aviation gasoline: ≤ ± 1.5/MON Gasoline for motor vehicles: ≤ ± 1.5/RON, ≤ ± 1.5/MO Automobile diesel fuels: ≤ ± 2.6/CN, ≤ ± 2.6/CI Regression sample retest: ≤ ± 0.5/RON, ≤ ± 0.5/MON Regression sample measurement: ≤ ± 1.5/RON, ≤ ± 1.5/MON Calibration accuracy: ≤ ± 0.2/RON, ≤ ± 0.2/MON |
| Precision (Confidence Level 95%) | Reproducibility: ≤ ± 0.5/RON Repeatability: ≤ ± 0.2/RON |
| Minimum Scale | 0.1/RON, 0.1/MON, 0.1/CI |
| Response Time | 1 min |
| Ambient Temperature | 10°C to 35°C |
| Humidity | < 85％ RH |
| Test Result | LCD display, it can store and print |
| Power Supply | AC (220 ± 10%) V, (50 ± 1) Hz |
| Measurement item | motor gasoline and diesel |
| measurement unit of octane is ON | 40 to 120 |
| Permissible error of octane | ± 0.5 max |
| Fluctuate range of octane | ± 0.2 max |
| measurement unit of cetane is CN | 20 to 100 |
| Permissible error of cetane | ± 1 max |
| Fluctuate range of cetane | ± 0.5 max |
| Measurement time | ± ˂ 20 |
| Critical value for battery | 2.5 V |
| Sensor | 60 ×100 mm |
| Temperature | -10˚C to 40˚C |
| Humidity | 30 % to 81 % RH |
| Barometric pressure | 64 to 106 kPa |
| Measurement of octane standard | ASTM D2699-86, ASTM D2700-86 |
| Measurement of cetane standard | ASTM D4737-03 |
| Operation duration | 15 h |
| Display | LED screen, printable result |
| Power consumption | 30 ma |
| Weight | 5 kg (max) |
| Graduated flask | 100 ml，50 ml |
| Conical flask | 100ml |
| Separatory funnel | 250ml |
| Volumetric analysis | |
| Automatic acid titration | |
| Automatic potential control | |
| Measurement range | |
| Potential measurement range | |
| Burette volume | |
| Minimum titration volume | |
| Burette precision | |
| Precision | |
| Ambient temperature | (-10 )°C to 35 °C |
| Relative humidity | ≤ 85 % |
| Temperature compensation | |
| Preset adjustment range of end point | |
| Preset controlling range for titration | |
| Precision of titration tube | |
| Test tube | Φ18 mm x 100 mm |
| Acidometer Full scale | 0 ~ 14.00 pH |
| Acidometer Accuracy | ± 0.01 pH |
| Heating power | 100 W ~ 1000 W |
| Total power consumption | Not more than 1200 W |
| Power supply | AC 220 V ± 10 %, 50 Hz |
| Dimension | 570 x 540 x 260 mm |
| Net weight |
| Graduated flask | |
| Conical flask | |
| Separatory funnel | |
| Volumetric analysis | |
| Automatic acid titration | |
| Automatic potential control | |
| Measurement range | |
| Potential measurement range | |
| Burette volume | |
| Minimum titration volume | |
| Burette precision | |
| Precision | |
| Ambient temperature | ≤ 35 °C |
| Relative humidity | ≤ 85 % |
| Temperature compensation | |
| Preset adjustment range of end point | |
| Preset controlling range for titration | |
| Precision of titration tube | Scale division is 0.02 ml |
| Test tube | |
| Acidometer Full scale | |
| Acidometer Accuracy | |
| Heating power | |
| Total power consumption | ≤ 1200 W |
| Power supply | AC 220 V ± 10 %, 50 Hz |
| Dimension | 830 x 290 x 370 mm |
| Net weight |
| Graduated flask | |
| Conical flask | |
| Separatory funnel | |
| Volumetric analysis | |
| Automatic acid titration | |
| Automatic potential control | |
| Measurement range | ≥0.05 mg KOH/g |
| Potential measurement range | 0 to 1800.0 mV |
| Burette volume | 10 mL |
| Minimum titration volume | 0.001 ml |
| Burette precision | ±0.1 %FS |
| Precision | Fit or above the relative standards |
| Ambient temperature | 5℃ to 35℃ |
| Relative humidity | Less 80 % |
| Temperature compensation | |
| Preset adjustment range of end point | |
| Preset controlling range for titration | |
| Precision of titration tube | |
| Test tube | |
| Acidometer Full scale | |
| Acidometer Accuracy | |
| Heating power | |
| Total power consumption | |
| Power supply | AC (220±11)V , 50±1 Hz |
| Dimension | About 350 × 280 ×178 mm |
| Net weight | Main unit 14 kg |
| Graduated flask | |
| Conical flask | |
| Separatory funnel | |
| Volumetric analysis | Titration condensation: 0.1 N; Controlling accuracy: ≤ ± 0.02 ml |
| Automatic acid titration | Titration condensation: 0.1 N; Controlling accuracy: ≤ ± 0.1 pH |
| Automatic potential control | Titration condensation: 0.1 N; Controlling accuracy: ≤ 10 mV |
| Measurement range | |
| Potential measurement range | |
| Burette volume | |
| Minimum titration volume | |
| Burette precision | |
| Precision | |
| Ambient temperature | 0 ~ 35 ℃ |
| Relative humidity | ≤ 85 % |
| Temperature compensation | Manual compensation; 5 ~ 60 ℃ |
| Preset adjustment range of end point | pH 1 to 13 or ± 100 ~ 1300 mV |
| Preset controlling range for titration | 1 ~ 3 pH or 100 ~ 300 mV from end point |
| Precision of titration tube | |
| Test tube | |
| Acidometer Full scale | |
| Acidometer Accuracy | |
| Heating power | |
| Total power consumption | |
| Power supply | AC 220 V ± 10 %, 50 Hz |
| Dimension | |
| Net weight |
| Measurement range | Room temperature ~ 150°C |
| Stirring speed | 0 ~ 1200 r / min |
| Heating power | 25 W |
| Interior Dimension | 360 × 250 × 545 mm |
| Exterior Dimension | 370 × 320 × 630 mm |
| Power supply | AC 220 V ± 10 %, 50 Hz |
| Temperature controlling accuracy | |
| Temperature controlling range | |
| Power supply for illumination | |
| Power of motor |
| Measurement range | |
| Stirring speed | |
| Heating power | |
| Interior Dimension | |
| Exterior Dimension | |
| Power supply | |
| Temperature controlling accuracy | ≤ 0.5 ℃ |
| Temperature controlling range | Room temperature ~ 200 ℃ |
| Power supply for illumination | 5 V |
| Power of motor | 2 kW |
| Ambient temperature | ≤ 35 °C |
| Relative humidity | ≤ 85 % |
| Ignition Mode | |
| Temperature range | 5 °C ~ 110 °C, Each scale division is 0.5 °C; 20 °C ~ 150 °C, Each scale division is 1.0 °C; 90 °C ~ 370 °C, Each scale division is 2 °C |
| Aperture of ignition device | 0.8 mm |
| Standard oil cup-Inner diameter | 50.7 ~ 50.8 mm |
| Standard oil cup- Depth | 55.7 ~ 56.0 mm |
| Standard oil cup- Depth of Marked line on the oil cup | 33.9 ~ 34.3 mm |
| Standard oil cup-Oil sample cubage | About 70 ml |
| Stirring speed | 90 ~ 120 rpm for procedure A; 250 ± 10 rpm for procedure B |
| Stirring blade | 8 × 40 mm |
| Sample temperature rising rate | 1 ~ 12 °C per minute |
| Measurement Range | |
| Flash Point | |
| Resolution | |
| Repeatability | |
| Reproducibility | |
| Accuracy | |
| Precision | |
| Gas Flame | |
| Heating power | 0 ~ 600 W |
| Dimension | 420 × 350 × 350 mm |
| Total Power Consumption | 600 W |
| Power supply | AC 220 V ± 10 %, 50 Hz |
| Net Weight |
| Ambient temperature | 10 °C ~ 40 °C |
| Relative humidity | ≤ 80 % |
| Ignition Mode | |
| Temperature range | |
| Aperture of ignition device | |
| Standard oil cup-Inner diameter | |
| Standard oil cup- Depth | |
| Standard oil cup- Depth of Marked line on the oil cup | |
| Standard oil cup-Oil sample cubage | |
| Stirring speed | |
| Stirring blade | |
| Sample temperature rising rate | |
| Measurement Range | Ambient Temperature ~ 250 °C |
| Flash Point | Lower than 104 °C , error is 2 °C; Higher than 104 °C , error is 6 °C |
| Resolution | 0.1 °C |
| Repeatability | |
| Reproducibility | |
| Accuracy | |
| Precision | 0.005 |
| Gas Flame | 3 ~ 4 mm |
| Heating power | |
| Dimension | 550 × 470 × 500 mm |
| Total Power Consumption | 350 W |
| Power supply | AC 220 V ± 10 %, 50 Hz |
| Net Weight |
| Ambient temperature | 10 °C ~ 40 ℃ |
| Relative humidity | ≤ 80 % |
| Ignition Mode | electron igniter / gas flame |
| Temperature range | Room Temperature ~ 300 ℃ |
| Aperture of ignition device | |
| Standard oil cup-Inner diameter | |
| Standard oil cup- Depth | |
| Standard oil cup- Depth of Marked line on the oil cup | |
| Standard oil cup-Oil sample cubage | |
| Stirring speed | |
| Stirring blade | |
| Sample temperature rising rate | |
| Measurement Range | Room Temperature ~ 300 ℃ |
| Flash Point | |
| Resolution | 0.1 ℃ |
| Repeatability | ≤ 2 ℃ |
| Reproducibility | ≤ 4 ℃ |
| Accuracy | 0.005 |
| Precision | |
| Gas Flame | |
| Heating power | |
| Dimension | |
| Total Power Consumption | 300 W |
| Power supply | AC 220 V ± 10 %, 50 Hz |
| Net Weight |
| Ambient temperature | Room temperature to 35 °C |
| Relative humidity | ≤ 85 % |
| Timing range | 1 s to 9 min 59 s |
| Temperature controlling range | Room temperature to 99.9 °C |
| Temperature controlling accuracy | ± 1 °C |
| Temperature resolution | 0.1 °C |
| Stirring speed | 1500 ± 15 rpm |
| Heating power for temperature controlling | 600 W |
| Total power consumption | ≤ 800 W |
| Power supply | AC 220 V ± 10 %, 50 Hz |
| Dimension | 520 × 460 × 122 mm |
| Ambient temperature | Room temperature to 35 °C |
| Relative humidity | ≤ 85 % |
| Timing range | |
| Temperature controlling range | Room temperature to 99.9 °C |
| Temperature controlling accuracy | ± 1 °C |
| Temperature resolution | |
| Stirring speed | 1500 ± 15 rpm |
| Heating power for temperature controlling | |
| Total power consumption | |
| Power supply | AC 220 V ± 10 %, 50 Hz |
| Dimension | 740 × 510 × 680 mm |
| Heating power | 2 kW |
| Cooling power | 0.5 kW |
| Steam temperature | 0 to 400℃ |
| Oven temperature | 0 to 500℃ |
| Refrigeration temperature | 0 to 60℃ |
| Refrigeration accuracy | ± 1℃ |
| Temperature measurement accuracy | ± 0.1℃ |
| Volume accuracy | ± 0.1 ml |
| Power | AC 220 V ± 10% 50 Hz |
| Ambient temperature | -10°C to 35°C |
| Relative humidity | ≤ 85 % |
| Thermometer | Each one for 70°C to 90°C , 100°C to120°C , and 125°C to 150°C |
| Scale division | 0.1 ℃ |
| Total length | 8000 mm |
| Water cooling tube | 4500 mm |
| Heating power system | 1000 W |
| Total power consumption | ≤ 1100 W |
| Power supply | AC 220 V ± 10 %, 50 Hz |
| Graduated flasks | 100 ml |
| Scale division of graduated flask | 1ml |
| Distillation flask | 125 ml |
| Ambient temperature | ≤ 35 °C |
| Relative humidity | ≤ 85 % |
| Temperature controlling accuracy | ± 0.5 °C |
| Temperature range air bath | Room temperature+ 10 °C to 60 °C |
| Thermometer | (-2 )°C to 300 ℃ and (-2) °C to 400 ℃ |
| Inner diameter of electric furnace | φ32 mm, φ38 mm |
| Outer diameter of electric furnace | φ50 mm |
| Dimension | 830 x 610 x 870 mm |
| Heating power system | 1000 W × 2 |
| Total power consumption | ≤ 2500 W |
| Power supply | AC 220 V ± 10 %, 50 Hz |
| Graduated flasks | 100 ml |
| Distillation flask | 125 ml |
| Ambient temperature | ≤ 35 °C |
| Relative humidity | ≤ 85 % |
| Temperature controlling accuracy | ± 0.5 °C |
| Thermometer | (-2 )°C to 300 ℃ and (-2) °C to 400 ℃ |
| Division value | 1°C |
| Scale division | 1 ml |
| Inner diameter of electric furnace | φ32 mm, φ38 mm |
| Outer diameter of electric furnace | φ50 mm |
| Dimension | 830 x 610 x 870 mm |
| Heating power system | 1000 W × 2 |
| Total power consumption | ≤ 5000 W |
| Power supply | AC 220 V ± 10 %, 50 Hz |
| Beaker quantity | 600 ml |
| Ambient temperature | (-10) °C ~ 40 °C |
| Relative humidity | ≤ 85 % |
| Thermometer Measurement range | (-5) °C ~ 300 °C |
| Thermometer Scale division | 1 °C |
| Thermometer Immersion depth | 7 mm |
| Thermometer Total length | 390 mm |
| Grease cup Material | Chromium-plated brass |
| Grease cup Inner diameter | Φ9.92 mm |
| Grease cup Orifice | Φ2.8 mm |
| Grease cup Height | 12 mm |
| Test tube Material | Heat-resistant borosilicate glass |
| Test tube Inner diameter | 11.1 mm to 12.7 mm |
| Heater | 800 W |
| Stirring motor | 60 rpm |
| Dimensions | 510 x 280 x 570 mm |
| Heating power of electric furnace | |
| Total power consumption | ≤ 900 W |
| Power supply | AC 220 V ± 10 %, 50 Hz |
| Beaker quantity | |
| Ambient temperature | ≤ 35 ℃ |
| Relative humidity | ≤ 85 % |
| Thermometer Measurement range | |
| Thermometer Scale division | |
| Thermometer Immersion depth | |
| Thermometer Total length | |
| Grease cup Material | |
| Grease cup Inner diameter | |
| Grease cup Orifice | |
| Grease cup Height | |
| Test tube Material | |
| Test tube Inner diameter | |
| Heater | |
| Stirring motor | |
| Dimensions | |
| Heating power of electric furnace | 250 W × 2 |
| Total power consumption | ≤ 700 W |
| Power supply | AC 220 V ± 10 %, 50 Hz |
| Graduated Flask | 200 ± 0.2 ml |
| Standard Water Value | 51 ± 1 s |
| Temperature Range | 0 ~ 100 °C |
| Ambient Temperature | |
| Temperature Controlling Accuracy | ± 0.2 °C |
| Relative Humidity | |
| Timer | |
| Accuracy Of Timer | 0.01 s |
| Heating Power | |
| Dimension | 510 x 360 x 270 mm |
| Power Of Heater | 550 W / 220 V |
| Total Power Consumption | |
| Power Supply | |
| =#REF! |
| Graduated Flask | 100 ml |
| Standard Water Value | 51 ± 1 s |
| Temperature Range | 0 ~ 100 °C |
| Ambient Temperature | |
| Temperature Controlling Accuracy | ± 0.1 °C |
| Relative Humidity | |
| Timer | |
| Accuracy Of Timer | 0.01 s |
| Heating Power | |
| Dimension | 510 x 365 x 290 mm |
| Power Of Heater | 550 W / 220 V |
| Total Power Consumption | |
| Power Supply | |
| =#REF! |
| Graduated Flask | 200 ± 0.2 ml (50 ± 0.2 ml for bituminous materials) |
| Standard Water Value | 51 ± 1 s |
| Temperature Range | 0 ~ 100 °C |
| Ambient Temperature | 10 °C ~ 40 °C |
| Temperature Controlling Accuracy | ± 0.1 °C |
| Relative Humidity | ≤ 85 % |
| Timer | Max is 9999 s |
| Accuracy Of Timer | |
| Heating Power | 700 W |
| Dimension | 630 x 490 x 760 mm |
| Power Of Heater | |
| Total Power Consumption | ≤ 800 W |
| Power Supply | AC 220 V ± 10 %, 50 Hz |
| =#REF! |
| Bath type | |
| Bath capacity | |
| Ambient temperature | |
| Relative humidity | |
| Temperature controlling range | |
| Temperature controlling accuracy | |
| Heating type | |
| Evaporation bath type and size | Aluminum block bath, φ260 × 130 mm |
| Constant temperature bath | |
| Holes for testing | 3 pieces |
| Size of holes for testing cylinder | φ51 × 70 mm |
| Flow rate display | Flow meter |
| Working temperature | 60 ℃ to 165 ℃ |
| Temperature controlling methods | Automatic temperature controlling |
| Temperature display | Digitally displayed |
| Working pressure for decompression valve | 0.035 MPa |
| Gas source | Compressed air > 110 L/min |
| Air flow rate at jet nozzle | |
| Dimension | 550 x 370 x 335 mm |
| Total power consumption | |
| Heating power | |
| Power supply | AC 220 V ± 10 %, 50 Hz; 2.5 kW |
| Bath type | |
| Bath capacity | |
| Ambient temperature | |
| Relative humidity | |
| Temperature controlling range | |
| Temperature controlling accuracy | |
| Heating type | |
| Evaporation bath type and size | Aluminum bath φ260 × 130 mm |
| Constant temperature bath | |
| Holes for testing | 5 pieces |
| Size of holes for testing cylinder | φ51 × 70 mm |
| Flow rate display | |
| Working temperature | 160 ℃ ~ 165℃ |
| Temperature controlling methods | |
| Temperature display | |
| Working pressure for decompression valve | 0.07 MPa |
| Gas source | |
| Air flow rate at jet nozzle | 600 ml / s |
| Dimension | 590 x 480 × 340 mm |
| Total power consumption | |
| Heating power | |
| Power supply | AC 220 V ± 10 %, 50 Hz; 3.5 kW |
| Bath type | Oil bath |
| Bath capacity | 5000 ml ± 50 ml |
| Ambient temperature | Room temperature to 35 °C |
| Relative humidity | ≤ 85 % |
| Temperature controlling range | RT to 250 °C |
| Temperature controlling accuracy | 150 °C ± 3 °C；180 °C ± 3 °C；250 °C ± 5 °C |
| Heating type | Electric heater |
| Evaporation bath type and size | |
| Constant temperature bath | |
| Holes for testing | |
| Size of holes for testing cylinder | |
| Flow rate display | |
| Working temperature | |
| Temperature controlling methods | |
| Temperature display | |
| Working pressure for decompression valve | |
| Gas source | |
| Air flow rate at jet nozzle | |
| Dimension | 840 x 380 x 600 mm |
| Total power consumption | ≤ 1200 W |
| Heating power | 1000 W |
| Power supply | AC 220 V ± 10 %, 50 Hz |
| Ambient temperature | (-10) °C ~ 35 °C |
| Relative humidity | ≤ 85 % |
| Capillary viscometer | 11 pieces |
| Stirring motor | 6 W, 1200 rpm |
| Sample quantity | |
| Bath temperature | |
| Measurement range | |
| Bath cubage | |
| Temperature controlling range | |
| Temperature controlling accuracy | ± 0.1 °C |
| Illumination | |
| Constant temperature bath | 20 L; two layers water bath |
| Timing range | |
| Barometric | |
| Timing accuracy | |
| Timing device | |
| Temperature sensor | Industrial platinum resistance; Pt100 |
| Inner capillary viscometer diameters | 0.4, 0.6, 0.8, 1.0, 1.2, 1.5, 2.0, 2.5, 3.0, 3.5 and 4.0 mm respectively (inner diameters of 5.0 and 6.0mm are optional) |
| Mercury thermometer scale division |
| Ambient temperature | (-10) °C ~ 35 °C |
| Relative humidity | ≤ 85 % |
| Capillary viscometer | 11 pieces |
| Stirring motor | 6 W, 1200 rpm |
| Sample quantity | |
| Bath temperature | |
| Measurement range | |
| Bath cubage | |
| Temperature controlling range | Ambient temperature ~ 100 °C |
| Temperature controlling accuracy | ± 0.1 °C |
| Illumination | |
| Constant temperature bath | 20 L, two layer bath |
| Timing range | |
| Barometric | |
| Timing accuracy | |
| Timing device | 0.1 s ~ 999.9 s, resolution is 0.1 s |
| Temperature sensor | |
| Inner capillary viscometer diameters | 0.4, 0.6, 0.8, 1.0, 1.2, 1.5, 2.0, 2.5, 3.0, 3.5 and 4.0 mm respectively |
| Mercury thermometer scale division |
| Ambient temperature | (-10) °C ~ 35 °C |
| Relative humidity | ≤ 85 % |
| Capillary viscometer | 7 pieces of Cannon-Fenske reserve-flow capillary viscometer tubes in a group |
| Stirring motor | 6 W, 1200 rpm |
| Sample quantity | 3 piece at the same time |
| Bath temperature | Ambient temperature ~ 180.0 °C |
| Measurement range | 100 ~ 150 °C or 150 ~ 200 °C |
| Bath cubage | 23 L |
| Temperature controlling range | |
| Temperature controlling accuracy | ± 0.1 °C |
| Illumination | |
| Constant temperature bath | |
| Timing range | |
| Barometric | |
| Timing accuracy | |
| Timing device | |
| Temperature sensor | |
| Inner capillary viscometer diameters | 1.02, 1.26, 1.48, 1.88, 2.20, 3.10 and 4.00 mm |
| Mercury thermometer scale division | 0.1 °C |
| Ambient temperature | ≤ 30 °C |
| Relative humidity | ≤ 85 % |
| Capillary viscometer | 13 pieces |
| Stirring motor | 6 W, 1200 rpm |
| Sample quantity | |
| Bath temperature | |
| Measurement range | |
| Bath cubage | |
| Temperature controlling range | Ambient temperature ~ 70 °C |
| Temperature controlling accuracy | ± 0.1 °C |
| Illumination | 6 W / 220 V fluorescent lamp |
| Constant temperature bath | 5.8 L with stainless steel inner tank |
| Timing range | |
| Barometric | |
| Timing accuracy | |
| Timing device | |
| Temperature sensor | |
| Inner capillary viscometer diameters | 0.4, 0.6, 0.8, 1.0, 1.2, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 5.0 and 6.0 mm |
| Mercury thermometer scale division |
| Measurement range | |
| Temperature controlling accuracy | |
| Refrigeration system | |
| Bath stirrer | |
| Sample stirrer | |
| Cold trough | |
| Controlling temperature of cold trough | |
| Constant temperature bath Cubage | |
| Constant temperature bath Types | |
| Temperature Range | |
| Temperature sensor | |
| Stirring motor Power | |
| Stirring motor Speed | |
| Ambient temperature | (-10)℃ ~ 35 ℃ |
| Relative humidity | ≤ 85 % |
| Refrigeration speed | |
| Repeatability for solidifying point | |
| Repeatability for pour point | |
| Reproducibility | |
| Pressure of cooling water | |
| The lowest temperature | |
| Sample cup Inner diameter | 31.0 ~ 32.0 mm |
| Sample cup Wall thickness | 1.0 ~ 1.5 mm |
| Sample cup Height | 115 ~ 125 mm |
| Pumping pressure | U type differential pressure meter 1961 Pa (200 mm H2O) |
| Dimensions | |
| Inner Dimensions | |
| Outer Dimensions | |
| Total power consumption | ≤ 150 W |
| Heating power | |
| Power supply | AC 220 V ± 10 %, 50 Hz |
| Measurement range | |
| Temperature controlling accuracy | ± 0.5 ℃ |
| Refrigeration system | New-type refrigeration compressor |
| Bath stirrer | |
| Sample stirrer | |
| Cold trough | Two holes in one trough, and same temperature |
| Controlling temperature of cold trough | |
| Constant temperature bath Cubage | |
| Constant temperature bath Types | |
| Temperature Range | |
| Temperature sensor | |
| Stirring motor Power | |
| Stirring motor Speed | |
| Ambient temperature | ≤ 30 ℃ |
| Relative humidity | ≤ 85 % |
| Refrigeration speed | |
| Repeatability for solidifying point | |
| Repeatability for pour point | |
| Reproducibility | |
| Pressure of cooling water | |
| The lowest temperature | |
| Sample cup Inner diameter | |
| Sample cup Wall thickness | |
| Sample cup Height | |
| Pumping pressure | |
| Dimensions | 620 x 460 x 355 mm |
| Inner Dimensions | |
| Outer Dimensions | |
| Total power consumption | 1000 W |
| Heating power | |
| Power supply | AC 220 V ± 10 %, 50 Hz |
| Measurement range | |
| Temperature controlling accuracy | |
| Refrigeration system | New-type refrigeration compressor |
| Bath stirrer | |
| Sample stirrer | |
| Cold trough | |
| Controlling temperature of cold trough | Cold trough I: RT ~ (-51) °C, ± 1°; Cold trough II:RT ~ (-80) °C, ± 1 °C |
| Constant temperature bath Cubage | |
| Constant temperature bath Types | |
| Temperature Range | |
| Temperature sensor | |
| Stirring motor Power | |
| Stirring motor Speed | |
| Ambient temperature | ≤ 30 ℃ |
| Relative humidity | ≤ 85 % |
| Refrigeration speed | |
| Repeatability for solidifying point | |
| Repeatability for pour point | |
| Reproducibility | |
| Pressure of cooling water | |
| The lowest temperature | |
| Sample cup Inner diameter | |
| Sample cup Wall thickness | |
| Sample cup Height | |
| Pumping pressure | |
| Dimensions | |
| Inner Dimensions | 560 x 380 x 250 mm |
| Outer Dimensions | 920 x 670 x 510 mm |
| Total power consumption | ≤ 1500 W |
| Heating power | |
| Power supply | AC 220 V ± 10 %, 50 Hz |
| Measurement range | |
| Temperature controlling accuracy | ± 0.5 °C |
| Refrigeration system | New-type refrigeration compressor |
| Bath stirrer | |
| Sample stirrer | |
| Cold trough | One trough with two baths, temperatures in two baths are equal |
| Controlling temperature of cold trough | Room temperature ~ (-70) °C |
| Constant temperature bath Cubage | |
| Constant temperature bath Types | |
| Temperature Range | |
| Temperature sensor | |
| Stirring motor Power | |
| Stirring motor Speed | |
| Ambient temperature | ≤ 30 ℃ |
| Relative humidity | ≤ 85 % |
| Refrigeration speed | |
| Repeatability for solidifying point | |
| Repeatability for pour point | |
| Reproducibility | |
| Pressure of cooling water | |
| The lowest temperature | |
| Sample cup Inner diameter | |
| Sample cup Wall thickness | |
| Sample cup Height | |
| Pumping pressure | |
| Dimensions | 730 x 580 x 520 mm |
| Inner Dimensions | |
| Outer Dimensions | |
| Total power consumption | ≤ 1000 W |
| Heating power | |
| Power supply | AC 220 V ± 10 %, 50 Hz |
| Thermometer | 0 ℃ ~ 360 °C |
| Scale Division | 1 °C |
| Spout Aperture | |
| Ambient Temperature | ≤ 35 °C |
| Relative Humidity | ≤ 85 % |
| Temperature Measurement- Full Scale | |
| Temperature Measurement- Repeatability | |
| Temperature Measurement- Reproducibility | |
| Temperature Measurement- Resolution | |
| Test accuracy | |
| Reappearance | |
| Graduation | |
| Outer Crucible-Material | Carbon structural steel |
| Outer Crucible-Diameter Of Upper Opening | Φ100 ± 5 mm |
| Outer Crucible-Height | 50 ± 5 mm |
| Outer Crucible-Diameter Of Bottom | Φ56 ± 2 mm |
| Inner Crucible-Material | Carbon structural steel |
| Inner Crucible-Diameter Of Upper Opening | Φ64 ± 1 mm |
| Inner Crucible-Height | 47 ± 1 mm |
| Inner Crucible-Diameter Of Bottom | Φ38± 1 mm |
| Inner Crucible-Scale Line | 12mm away from the rim of upper opening and 18mm away from the rim of upper opening |
| Precision | |
| Gas Tube | Φ0.8 ~ Φ1 mm |
| Flame | 3 to 4 mm |
| Heater | Heated by an electric furnace |
| Heating Power | 1000W |
| Dimensions | 410 x 360 x 240 mm |
| Power Consumption | ≤ 1100 W |
| Power Supply | AC 220 V ± 10 %, 50Hz |
| =#REF! |
| Thermometer | 6 ℃ ~ 400 ℃ |
| Scale Division | 2 °C |
| Spout Aperture | 0.6 ~ 0.8 mm |
| Ambient Temperature | -10 ℃ ~ 50 ℃ |
| Relative Humidity | ≤ 85 % |
| Temperature Measurement- Full Scale | |
| Temperature Measurement- Repeatability | |
| Temperature Measurement- Reproducibility | |
| Temperature Measurement- Resolution | |
| Test accuracy | |
| Reappearance | |
| Graduation | |
| Outer Crucible-Material | |
| Outer Crucible-Diameter Of Upper Opening | |
| Outer Crucible-Height | |
| Outer Crucible-Diameter Of Bottom | |
| Inner Crucible-Material | |
| Inner Crucible-Diameter Of Upper Opening | |
| Inner Crucible-Height | |
| Inner Crucible-Diameter Of Bottom | |
| Inner Crucible-Scale Line | |
| Precision | |
| Gas Tube | |
| Flame | |
| Heater | |
| Heating Power | |
| Dimensions | 480 x 400 x 300 mm |
| Power Consumption | 0 ~ 600 W |
| Power Supply | AC 220 V ± 10 %, 50 Hz |
| =#REF! |
| Thermometer | |
| Scale Division | |
| Spout Aperture | |
| Ambient Temperature | 10 ℃ ~ 40 ℃ |
| Relative Humidity | ≤ 85 % |
| Temperature Measurement- Full Scale | Ambient temperature to ~ 400 ℃ |
| Temperature Measurement- Repeatability | ≤ 4 ℃ |
| Temperature Measurement- Reproducibility | |
| Temperature Measurement- Resolution | |
| Test accuracy | 0.005 |
| Reappearance | ≤ 8 times |
| Graduation | 0.1 ℃ |
| Outer Crucible-Material | |
| Outer Crucible-Diameter Of Upper Opening | |
| Outer Crucible-Height | |
| Outer Crucible-Diameter Of Bottom | |
| Inner Crucible-Material | |
| Inner Crucible-Diameter Of Upper Opening | |
| Inner Crucible-Height | |
| Inner Crucible-Diameter Of Bottom | |
| Inner Crucible-Scale Line | |
| Precision | |
| Gas Tube | |
| Flame | |
| Heater | |
| Heating Power | |
| Dimensions | 620 x 500 x 440 mm |
| Power Consumption | 400 W |
| Power Supply | AC 220 V ± 10 %, 50 Hz |
| =#REF! |
| Thermometer | |
| Scale Division | |
| Spout Aperture | |
| Ambient Temperature | 10 ℃ ~ 40 °C |
| Relative Humidity | ≤ 80 % |
| Temperature Measurement- Full Scale | Ambient temperature to 300 °C |
| Temperature Measurement- Repeatability | ≤ 8 °C |
| Temperature Measurement- Reproducibility | ≤ 16 °C |
| Temperature Measurement- Resolution | 0.1 °C |
| Test accuracy | 0.002 |
| Reappearance | |
| Graduation | |
| Outer Crucible-Material | |
| Outer Crucible-Diameter Of Upper Opening | |
| Outer Crucible-Height | |
| Outer Crucible-Diameter Of Bottom | |
| Inner Crucible-Material | |
| Inner Crucible-Diameter Of Upper Opening | |
| Inner Crucible-Height | |
| Inner Crucible-Diameter Of Bottom | |
| Inner Crucible-Scale Line | |
| Precision | 0.005 |
| Gas Tube | |
| Flame | 3 to 4 mm |
| Heater | |
| Heating Power | |
| Dimensions | 550 x 470 x 410 mm |
| Power Consumption | ≤ 500 W |
| Power Supply | AC 220 V ± 10 %, 50 Hz |
| =#REF! |
| Light source | |
| Temperature of grinding milk white light bulb | |
| Light hole( Φ14) | |
| Color comparing tube | |
| Dimension | 390 x 260 x 590 mm |
| Non-colorful flat bottom glass tube | |
| Observation lens | |
| Total power consumption | ≤ 1200 W |
| Power supply | AC 220 V ± 10 %, 50 Hz |
| Heating power of water bath | 1000 W |
| Relative humidity | ≤ 85 % |
| Ambient temperature | ≤ 35 °C |
| Temperature display mode of water bath | Digitally displayed by a LED |
| Temperature controlling range in water bath | RT to 90 °C |
| Temperature controlling accuracy in water bath: | ± 1 °C |
| Temperature controlling range in funnel | RT to 90 °C |
| Temperature display mode of funnel | Digitally displayed by a LED |
| Temperature controlling accuracy in funnel | ± 2 °C |
| Controlling case (L × W × H) | 390 × 260 × 590 mm |
| Water bath (L × W × H) | 90 × 290 × 370 mm |
| Cooling bath temperature | |
| Evaporation temperature | |
| Flow rate | |
| Timing range of timer | |
| Measurement range | |
| Voltage rising rate | |
| Distance between electrodes | |
| Output power |
| Light source | |
| Temperature of grinding milk white light bulb | |
| Light hole( Φ14) | |
| Color comparing tube | |
| Dimension | |
| Non-colorful flat bottom glass tube | |
| Observation lens | |
| Total power consumption | |
| Power supply | AC 220 V ± 10 %, 50 Hz |
| Heating power of water bath | |
| Relative humidity | |
| Ambient temperature | |
| Temperature display mode of water bath | |
| Temperature controlling range in water bath | RT ~ 90 ℃ ± 5 ℃ |
| Temperature controlling accuracy in water bath: | |
| Temperature controlling range in funnel | |
| Temperature display mode of funnel | |
| Temperature controlling accuracy in funnel | |
| Controlling case (L × W × H) | |
| Water bath (L × W × H) | |
| Cooling bath temperature | (-35) ℃ ± 1 ℃ |
| Evaporation temperature | 35 ℃ ± 1 ℃ |
| Flow rate | 2 ~ 3 L / min |
| Timing range of timer | 0 ~ 60 min |
| Measurement range | |
| Voltage rising rate | |
| Distance between electrodes | |
| Output power |
| Light source | |
| Temperature of grinding milk white light bulb | |
| Light hole( Φ14) | |
| Color comparing tube | |
| Dimension | |
| Non-colorful flat bottom glass tube | |
| Observation lens | |
| Total power consumption | |
| Power supply | AC 220 V ± 5 % , 50Hz |
| Heating power of water bath | |
| Relative humidity | |
| Ambient temperature | |
| Temperature display mode of water bath | |
| Temperature controlling range in water bath | |
| Temperature controlling accuracy in water bath: | |
| Temperature controlling range in funnel | |
| Temperature display mode of funnel | |
| Temperature controlling accuracy in funnel | |
| Controlling case (L × W × H) | |
| Water bath (L × W × H) | |
| Cooling bath temperature | |
| Evaporation temperature | |
| Flow rate | |
| Timing range of timer | |
| Measurement range | 0 ~ 75 kV |
| Voltage rising rate | 3 kV ± 10 % / s |
| Distance between electrodes | 2.5 mm |
| Output power | 2 kVA |
| Light source | 220 V, 100 W |
| Temperature of grinding milk white light bulb | 2750 ± 50 K |
| Light hole( Φ14) | 26 pieces |
| Color comparing tube | Φ32 mm |
| Dimension | 440 x 420 x 340 mm |
| Non-colorful flat bottom glass tube | 120 ~ 130 mm |
| Observation lens | Concave mirror and separated bar |
| Total power consumption | |
| Power supply | |
| Heating power of water bath | |
| Relative humidity | |
| Ambient temperature | |
| Temperature display mode of water bath | |
| Temperature controlling range in water bath | |
| Temperature controlling accuracy in water bath: | |
| Temperature controlling range in funnel | |
| Temperature display mode of funnel | |
| Temperature controlling accuracy in funnel | |
| Controlling case (L × W × H) | |
| Water bath (L × W × H) | |
| Cooling bath temperature | |
| Evaporation temperature | |
| Flow rate | |
| Timing range of timer | |
| Measurement range | |
| Voltage rising rate | |
| Distance between electrodes | |
| Output power |
| Samples | 2 |
| Temperature | |
| Oil bath cubage | 30 L |
| Angle between bomb and water surface | 30 ° |
| Speed of rotary assembly | 100 ± 5 RPM |
| Pressure sensor | 0 to 1.6 Mpa; Accuracy: ±2% |
| Oil bath Temperature controlling range | RT to 200 °C (adjustable) |
| Temperature controlling mode | |
| Temperature controlling range | |
| Temperature controlling accuracy | ± 0.1 °C |
| Flow meter | |
| Size | 550 × 800 × 1000 mm |
| Power of heater | 2500 W |
| Power supply | 220 V ± 10 % |
| Power consumption | |
| Weight | 45 kg |
| Dimension | 860 × 710 × 104 mm |
| Samples | 6 |
| Temperature | |
| Oil bath cubage | |
| Angle between bomb and water surface | |
| Speed of rotary assembly | |
| Pressure sensor | |
| Oil bath Temperature controlling range | |
| Temperature controlling mode | Automatic digital temperature |
| Temperature controlling range | Room temperature ~ 160 °C |
| Temperature controlling accuracy | ± 0.2 °C |
| Flow meter | |
| Size | |
| Power of heater | |
| Power supply | 220 V, 50 Hz |
| Power consumption | ≤ 1100 W |
| Weight | |
| Dimension |
| Samples | 8 |
| Temperature | 100 ℃ |
| Oil bath cubage | |
| Angle between bomb and water surface | |
| Speed of rotary assembly | |
| Pressure sensor | |
| Oil bath Temperature controlling range | |
| Temperature controlling mode | |
| Temperature controlling range | |
| Temperature controlling accuracy | 0.1 ℃ |
| Flow meter | 3 ± 0.3 L / H oxygen |
| Size | |
| Power of heater | |
| Power supply | 220 V ± 10 %, 60 Hz |
| Power consumption | |
| Weight | |
| Dimension |
| Temperature Range | Ambient to 150℃ |
| Temperature Precision | ± 0.1°C |
| Test Unit | 2 units |
| Heating Power | 1800 W |
| Ambient Temperature | (Room temperature to 35°C |
| Relative Humidity | ≤ 85 % |
| Power Supply | AC (220 ± 10 %) V, 50 Hz |
| Heat capacity | |
| Temperature measurement range | |
| Temperature controlling range | 10 ℃ ~ 35 ℃ |
| Repeatability error | |
| Endured pressure in oxygen bomb | |
| Operation environment temperature | |
| Temperature resolution | 0.001 ℃ |
| Mean value of heat capacity | 15 kJ / K |
| Heating power | |
| Temperature fluctuation | |
| Ambient temperature | 20 ℃ ± 5 ℃ |
| Relative humidity | ≤ 85 % |
| Endured pressure of oxygen bomb | 20 MPa Test pressure in oxygen bomb: 3 MPa |
| Temperature saved | 31 pieces |
| Measurement accuracy for heat value | ≤ 0.2 % |
| Dimension | 400 × 400 × 600 mm |
| weight | 18 kg |
| Power supply |
| Heat capacity | |
| Temperature measurement range | 10 ~ 35 ℃ |
| Temperature controlling range | |
| Repeatability error | ≤ 0.2 % (Grade C) |
| Endured pressure in oxygen bomb | 20 MPa |
| Operation environment temperature | 15 ~ 28 ℃ |
| Temperature resolution | 0.001 ℃ |
| Mean value of heat capacity | |
| Heating power | |
| Temperature fluctuation | Not more than 1 ℃ during a test |
| Ambient temperature | Less than 85 % |
| Relative humidity | |
| Endured pressure of oxygen bomb | |
| Temperature saved | |
| Measurement accuracy for heat value | |
| Dimension | |
| weight | |
| Power supply | AC 220 V ± 5 %, 50 Hz |
| Heat capacity | 14000 ~ 15000 J / K |
| Temperature measurement range | 10 ~ 35 ℃ |
| Temperature controlling range | |
| Repeatability error | ≤ 0.2 % (Grade C) |
| Endured pressure in oxygen bomb | 20 MPa |
| Operation environment temperature | 15 ~ 28 ℃ |
| Temperature resolution | 0.001 ℃ |
| Mean value of heat capacity | |
| Heating power | |
| Temperature fluctuation | Not more than 1 ℃ during a test |
| Ambient temperature | Less than 85 % |
| Relative humidity | |
| Endured pressure of oxygen bomb | |
| Temperature saved | |
| Measurement accuracy for heat value | |
| Dimension | |
| weight | |
| Power supply | AC 220 V ± 5 %, 50 Hz |
| Porcelain crucible | 30 ml |
| Inner iron crucible | 75 ml |
| Outer iron crucible | 190 ml |
| Burner | Mig Burner |
| Bath type | |
| Heating type | |
| Temperature controlling range | |
| Temperature controlling accuracy | |
| Relative humidity | |
| Dimensions | 400 x 380 x 270 mm |
| Total power consumption | |
| Ambient temperature | |
| Heating power | |
| Power supply |
| Porcelain crucible | |
| Inner iron crucible | |
| Outer iron crucible | |
| Burner | |
| Bath type | Four holes with a furnace |
| Heating type | Electric resistance furnace |
| Temperature controlling range | 0 ~ 520 °C |
| Temperature controlling accuracy | ± 5 °C |
| Relative humidity | ≤ 85 % |
| Dimensions | 730 x 510 x 470 mm |
| Total power consumption | ≤ 2000 W |
| Ambient temperature | ~ 35 °C |
| Heating power | 300 W +600 W +1000 W |
| Power supply | 220 V ± 10 %, 50 Hz |
| Coking furnace | Metal furnace |
| Heating mode | Electric heating |
| Test unit | 5 units |
| Temperature range | Ambient to 550°C |
| Temperature precision | ≤ ± 5℃ |
| Ambient temperature | (Room temp. to 35)℃ |
| Relative humidity | ≤ 85 % |
| Power consumption | 2000 W |
| Power Supply | AC 220V ±10%, 50Hz |
| Sample hole | 4 pieces |
| Sample quantity | 4 to 12 pieces |
| Ambient temperature | Room temperature to 35 °C |
| Temperature controlling range | Room temperature to 100°C |
| Temperature controlling accuracy | ± 1°C |
| Temperature controller | Pt100 |
| Relative humidity | ≤ 85 % |
| Timing range | 1 min to 24 hours |
| Heating power | 600 W for temperature controlling; 1000 W for auxiliary heating |
| Total power consumption | ≤ 1800 W |
| Dimensions | 580 × 460 × 760 mm |
| Power supply | AC 220 V ± 10 %, 50 Hz |
| Sample hole | 2 pieces |
| Speed of stirring motor | 1400 rpm |
| Ambient temperature | 10 to 35°C |
| Temperature controlling range | Room Temperature to 100°C |
| Temperature controlling accuracy | ± 0.5°C |
| Temperature controller | Pt100 |
| Relative humidity | ≤ 85 % |
| Delay time | 0.01 s to 99 hours 99 minutes |
| Heating power | 600 W for temperature controlling; 1000 W for auxiliary heating |
| Total power consumption | ≤ 1700 W |
| Dimensions | 580 × 520 × 810 mm |
| Power supply | AC 220 V ± 10 %, 50 Hz |
| Sample hole | 4 pieces |
| Speed of stirring motor | 1400 rpm |
| Speed for sample stirring | 1000 ± 50 rpm |
| Ambient temperature | Room temperature to 35°C |
| Temperature controlling range | 0 to 100°C |
| Temperature controlling accuracy | ± 1°C |
| Temperature controller | Pt100 |
| Relative humidity | ≤ 85 % |
| Timing range | 1 min to 24 hours |
| Heating power | 600 W for temperature controlling; 1000 W for auxiliary heating |
| Total power consumption | ≤ 1800 W |
| Dimensions | 880 × 430 × 840 mm |
| Power supply | AC 220 V ± 10%, 50Hz |
| Sample hole | 4 pieces |
| Ambient temperature | Room temperature to 35°C |
| Temperature controlling range | 0 to 100°C |
| Temperature controlling accuracy | ± 1°C |
| Relative humidity | ≤ 85 % |
| Timing range | 1 min to 24 hours |
| Total power consumption | ≤ 1800W |
| Dimensions | 880 × 430 × 960 mm, 590 × 490 × 430 mm |
| Power supply | AC 220 V ± 10 %, 50 Hz |
| Air flow rate | |
| Max. Preset time | |
| Chamber diameter of oven | |
| Heating power of oven | |
| Max. Temperature of oven | |
| Sample quantity | 2 to 3 ml (it is equal to sample depth of 3 mm to 4 mm) |
| Measurement time | 60, 120, 240, 300, and 600 s at random |
| Measurement range | 7 ppm to 5 % |
| Repeatability | < 0.029 (S + 0.6) |
| Reproducibility | < 0.063 (S + 0.6) |
| Temperature | 5 ℃ to 40 ℃ |
| Relative humidity | ≤ 85 % (30 ℃) |
| Power supply | AC 220 V ± 20 V, 50 Hz |
| Rated power | 30 W |
| Dimensions | 468 x 368 x 136 mm |
| Weight | 13 kg |
| Air flow rate | Not less than 150 L / h |
| Max. Preset time | 99 min 59 s (100 min) |
| Chamber diameter of oven | Φ22 mm |
| Heating power of oven | 1400 W × 2 |
| Max. Temperature of oven | 950 °C |
| Sample quantity | |
| Measurement time | |
| Measurement range | |
| Repeatability | |
| Reproducibility | |
| Temperature | |
| Relative humidity | |
| Power supply | AC 220 V ± 10 %, 50 Hz |
| Rated power | |
| Dimensions | 720 x 620 x 630 mm, 560 x 410 x 670 mm, 820 x 500 x 290 mm |
| Weight |
| Test bomb | |
| Operation temperature of water bath | RT ~ 90 °C |
| Bath temperature | |
| Temperature controlling accuracy | ± 0.1 °C |
| Dimensions | 550 × 520 × 102 mm |
| Pressure meter accuracy | ± 0.4 % kPa |
| Heating power of water bath | 1600 W |
| Total power consumption | ≤ 1700 W |
| Power supply | AC 220 V ± 10 %, 50 Hz |
| Relative humidity | ≤ 85 % |
| Ambient temperature | (-10) °C ~ 35 °C |
| Pressure range |
| Test bomb | Two samples or a group of parallel samples |
| Operation temperature of water bath | |
| Bath temperature | 37.8 °C |
| Temperature controlling accuracy | 0.1 °C |
| Dimensions | 500 × 560 × 680 mm, 950 × 540 × 720 mm |
| Pressure meter accuracy | |
| Heating power of water bath | 1400 W |
| Total power consumption | ≤ 1500 W |
| Power supply | AC 220 V ± 10 % |
| Relative humidity | ≤ 85 % |
| Ambient temperature | (-10) °C ~ 35 °C |
| Pressure range | 0 ~ 200 kPa |
| Ambient Temperature | 10°C to 35°C |
| Measurement Range | 0 to 100 mg |
| Resolution | 0.1 µg |
| Max. Electrolysis Speed | 40 µg /s |
| Amount and Precision of electrolysed water | 10 µg to 1000 µg, ± 2 µg and >1000 µg, 0.2 % |
| Relative Humidity | ≤ 85 % |
| Max. Power Consumption | 30 W |
| Power Supply | AC 220 V ± 20 %, 50 Hz |
| Dimension | 320 × 240 × 150 mm |
| Net Weight | 5 kg |
| Ambient Temperature Range | ≤ 35°C |
| Relative Humidity | ≤ 85% |
| Distillation Flask | |
| Receiver | |
| Condenser | |
| Heating Unit | |
| Heating Mantle Cap Power | 1000 W |
| Sample Determination | 1 at a time |
| Dimension (exclusive of test vessels) | |
| Dimension (Inclusive of test vessels) | |
| Dimension | 580 × 350 × 300 mm |
| Power Supply | AC 200 ± 10 % V, 50 Hz |
| Ambient Temperature Range | ≤ 35°C |
| Relative Humidity | ≤ 85% |
| Distillation Flask | |
| Receiver | |
| Condenser | |
| Heating Unit | |
| Heating Mantle Cap Power | 1000 W × 2 |
| Sample Determination | 2 at a time |
| Dimension (exclusive of test vessels) | |
| Dimension (Inclusive of test vessels) | |
| Dimension | 690 × 570 × 310 mm |
| Power Supply | AC 200 ± 10 % V, 50 Hz |
| Ambient Temperature Range | -10 to 35°C |
| Relative Humidity | ≤85% |
| Distillation Flask | 1000 ml |
| Receiver | 5 ml, with 0.05 ml graduation |
| Condenser | 400 mm with ± 5 mm accuracy |
| Heating Unit | Heating mantle cap, |
| Heating Mantle Cap Power | 500 W × 2, continuous adjustment |
| Sample Determination | 2 at a time |
| Dimension (exclusive of test vessels) | 425 × 330 × 150 mm |
| Dimension (Inclusive of test vessels) | 425 × 330 × 1180 mm |
| Dimension | |
| Power Supply | AC 200 ± 10 % V, 50 Hz |
| Measurement range | 0 to 600 penetration scale |
| Timing controller | 5 sec, 8 sec, 10 sec, 12 sec, 30 sec and 60 sec |
| Time accuracy | ± 0.1 seconds |
| Resolution | 0.01 mm |
| Penetration accuracy | ± 1 penetration |
| Temperature control accuracy | 25 °C ± 0.1 °C |
| Temperature control mode | High accuracy digital temperature controller |
| Weight of standard needle | 2.5 ± 0.05 g |
| Weight of standard cone | 102.5 ± 0.05 g |
| Power consumption | 200 W |
| Dimensions (L × W × H) | 750 × 450 × 750 mm |
| Weight | 40 kg |
| Measurement range | 0 to 600 penetration scale |
| Timing controller | 5 sec or 60 sec |
| Time accuracy | ± 0.1 seconds |
| Resolution | 0.01 mm |
| Penetration accuracy | ± 1 penetration |
| Temperature control accuracy | 25 °C ± 0.1 °C |
| Environment temperature | 15 °C to 35 °C |
| Weight of standard needle | 2.5 ± 0.05 g |
| Power consumption | 200 W |
| Power supply | AC 220 V ± 10 %, 50 Hz |
| Dimensions (W × L × H) | 650 × 500 × 850 mm |
| Weight | 30 kg |
| Penetrometer |
|
||||||||||||||||||
| Circulatory Water Bath |
|
| Measurement range | 0 to 600 penetration scale |
| Timing range | 0 sec to 60 sec |
| Time accuracy error | ≥ ± 0.1 seconds |
| Resolution | 0.1 penetration |
| Power consumption | 200 W |
| Power supply | AC 220 V ± 10 %, 50 Hz |
| Needle diameter | 50 mm |
| Sample container (D × H) | 55 mm × 35 mm |
| Dimensions (L × W × H) | 260 × 400 × 600 mm |
| Standard weight | 50 g |
| Weight of standard needle | 2.5 ± 0.05 g |
| Net Weight | 15 kg |
